Emerald T

Fixed Table Stand for BeoVision Horizon

Can be fitted with frames to hold peripheral devices discreetly behind your Horizon

This product is currently out of stock and unavailable.

SKU: -EM1- Categories: , , Tags: , , , , , ,

Description

Horizon table stand

Emerald T

Emerald T is designed to hold the BeoVision Horizon in an upright position to give the maximum viewing experience, while the footprint of the table stand has been minimised to allow it to be positioned on even the narrowest of side cabinets. The base is incredibly low profile, so low that the bottom of the TV sits less than 20mm from the tables surface. The base also protrudes very little in front of the TV, the small amount you can see emulates the shape of the bezel that frames the Horizon’s screen & speaker.

The column of the table stand is hollow to allow for tidy cabling, with multiple entry/exit points for the cables, it’s easy to fit the multitude of different peripheral devices using the Frames & Support Grips∞, supplied as part of Emerald T one and Emerald T plus¹. Frames (including Support Grips) can be purchased separately at a later date. And because you don’t need to disassemble anything to fit a new Frame, you can easily hide more peripheral devices behind the BeoVision Horizon when you want to.

Emerald T only works with BeoVision Horizon. If you have a different television, you can head back to the Shop to discover the Indigo Lime bracket designed for your television.

  • Emerald T stand -front view
    Emerald T stand -front view
  • Emerald T stand -back view
    Emerald T stand -back view
  • Emerald T one -holding 1 device
    Emerald T one -holding 1 device
  • Emerald T one -holding 2 devices (inc. 1 mini)
    Emerald T one -holding 2 devices (inc. 1 mini)
  • Emerald T plus -holding 2 devices
    Emerald T plus -holding 2 devices
  • Emerald T plus -holding 4 devices
    Emerald T plus -holding 4 devices
  • Emerald T plus -holding 4 devices (inc. 1 mini)
    Emerald T plus -holding 4 devices (inc. 1 mini)
  • Support Grips
    Support Grips

 

Able to hold up to 6.5 kilograms each¹, the frames are incredibly strong, and the infinitely adjustable Support Grips∞ can accommodate a peripheral device from as small as 15mm high to 80mm safely and securely. This huge range of abilities translates into not needing an expensive custom cage for each peripheral device. Furthermore, the Support Grips are easy to re-adjust with no loss in performance, resulting in no requirement for any additional parts just to simply upgrade your device/s.

Instructions

View the Emerald T installation guide (opens .pfd in a new tab)


¹- Please remember it is your responsibility to make sure that the system is stable.
∞ – Patent pending

Pictures

 


 

The Range

The Emerald T range breakdown
  • Emerald T stand – Table Stand only. (frames can be purchased separately at a later date)
  • Emerald T one – a table stand & 1 frame. The frame can be attached to either the left or right side of the Emerald Stand for ease of installation and adjustment.
  • Emerald T plus – a table stand & 2 frames. One frame on each side of the Emerald Stand for holding up to 4 peripheral devices.
  • Emerald X – a frame (available in the Part Shop) to compliment a pre-installed Emerald T stand or T one. NOT compatible with Emerald T plus (2 frames).

Each and every frame¹ comes with a pair of Support Grips to hold your peripheral device(s) securely. If you want to find out more about these amazing little devices, head over to the Support Grips page.

 


¹Support Grips are NOT included on the Accessory Frame